|
| |
The Team Package is the race mechanics secret weapon in
producing repeatable and reliable high performance engine hp curves (power
bands) . Team mechanic no longer need to spend hours and hours porting cylinder
heads and hoping they all come out with similar flow rates. MF=MG Labs can port
and flow match (4-8) cylinder heads to near identical flow rates (within 2%) of
the other heads. Team mechanics can choose combustion chamber options: 1.
Matched cc volumes 2. High/ Low compression sets (2x cc matched high
compression and 2x cc matched low compression) 3. Staggered cc volumes (not
matching cc volumes).
- MF=MG Labs cleans and inspect your heads and valves as
soon as it arrives. You will receive an e-mail with the condition and
status of your head work.
- MF=MG Labs blueprints your head (CC of combustion
chambers match, modify heads water jackets, check decks for warpage And Mill
heads if needed).
- MF=MG Labs ports your heads to achieve maximum efficiency
in the transfer of fuel/air into the cylinder, and the evacuation of exhaust
gases from the cylinder.
- MF=MG Labs cut your valves and valve seats to create a
precise seal.
- MF=MG Labs assembles and flow bench tests your head
to verify that the porting work achieves target velocity in both intake and
exhaust tracks.
- MF=MG Labs compares the flow bench reports and adjusts
port structures to achieve identical flow rates in all four heads.
- MF=MG Labs packs the heads with flow bench reports and
ships out to you. All within 72 Hours!
 |
We Make Getting
Your Head Ported and Valves cut Easy !!!